Phone: 1-859-255-5001 Fax: 1-859-255-6656
       
       

Specifications

 

Click here for an inside view with additional information/features.


Body Brass Alloy 360
Seals Buna-N (See options page for other seal options.)
Spool 303 Stainless Steel (See options page for spool functions.)
Port Size See options page for available port sizes.
Temperature Range -20°F to +160°F (With Buna-N seals)
Pressure Rating

Pneumatic service - vacuum through 250 PSI
Hydraulic service - 2000 PSI for 1/4", 3/8" and 1/2" models; 3000 PSI for 7/16-20 or 9/16-18 SAE models

NOTE: A Mimimum Filtration Rating of 10 Microns is Recommended for Pneumatic or Hydraulic Service

Flow Pneumatic 1/4" up to 1.00 Cv, 3/8" and 1/2" up to 1.13 Cv
Hydraulic up to 16 GPM
Voltages and Electrical Characteristics See solenoid options charts below.

 

Model Numbers
Primary Actuator Secondary Actuator * Function Model Number
Solenoid Spring 2 Position, Spring Return B1A
Solenoid 2 Position B2A
3 Position, Spring Center B2A-3S
* Two position models without return springs must be mounted with the spool in the horizontal position.
 
Solenoid
Voltage Coil Part Number Solenoid Part Number Inrush Amps Holding Amps
120V/60Hz 03-0300 03-0378 2.3 0.470
230V/60Hz 03-0303 03-0379 1.15 0.235
460V/60Hz 03-0306 03-0380 0.57 0.117
110V/50Hz 03-0286 03-0377 2.2 0.450
220V/50Hz 03-0290 03-0376 1.1 0.255
460V/50Hz 03-0294 03-0734 0.55 0.113
6V DC 03-0355 03-0366 0 7.3
12V DC 03-0356 03-0367 0 3.32
24V DC 03-0357 03-0368 0 1.66


How to Order Example:

This would be a double solenoid, 3-position, spring centered, 4-way, 4-ported valve with 3/8" NPT ports and 120V/60Hz operators for hydraulic service with a Type V spool (supply blocked with cylinder ports to tank).

Note: When ordering, always state:
  1. Model
  2. Port Size
  3. Media to be used (air or hydraulic). If special hydraulic fluids are to be used, advise type of fluid or specify your O-ring material
  4. Spool type desired
  5. Desired coil type and voltage